Xenon lamp aging test Xenon lamp aging test is a test that simulates the full sunlight spectrum, and xenon lamp aging test is a test that simulates the reliability of artificial climate at present. It can simulate the artificial climate test which is similar to the nature in a short time. This test can be used for the selection of new materials, the improvement of existing materials or the testing of changes in durability after evaluating the composition of materials. It can provide corresponding simulation test environment and accelerated test for scientific research, product development and quality control. It can better simulate the changes of products exposed to the sun in different environments. Xenon lamp aging test products are applicable to plastics, food and cosmetics, textiles, auto parts, packaging materials, building materials, rubber, paint, paint, ink, paper, electronic and electrical products, etc. Xenon lamp aging test standard: GB/T16422.2-1999 Plastics Test Methods for Exposure to Laboratory Light Sources Part 2: Xenon Arc Lamp GB/T1865-2009: Paints and Varnishes - Artificial Weathering and Artificial Radiation Exposure - Filtered Xenon Arc Radiation GJB150.7A-2009 Environmental Test Methods of Junyong Laboratory Part 7: Solar Radiation Test GB/T5170.9-1996 Verification of Basic Parameters of Environmental Testing Equipment for Electric and Electronic Products Xenon Lamp Aging Test Standard Method for Xenon Lamp Aging Test Chamber Solar Radiation Test Equipment Ultraviolet aging test The ultraviolet aging test is mainly applicable to the aging test of non-metallic materials against sunlight and artificial light source. The ultraviolet aging test uses the fluorescent ultraviolet lamp as the light source. Through simulating the ultraviolet radiation and condensation in the natural sunlight, the accelerated weathering test is carried out on the materials to obtain the results of the weathering resistance of the materials. It can simulate such environmental conditions as ultraviolet, rain, high temperature, high humidity, condensation, darkness, etc. in the natural climate, reproduce these conditions, combine them into a cycle, and let it automatically complete the cycle times. Common test standards for UV aging test: ASTM G154/G53 Operation of Fluorescent Ultraviolet Lamp Exposure Test for Nonmetallic Materials ASTM D4329 Fluorescent UV Exposure Test for Plastics ASTM D4587 Paint Aging Test (UV Aging) AATCC 186 Weather resistance: UV and humidity exposure; ISO 4892-3:2006 Exposure of laboratory light sources fluorescent ultraviolet lamp; ISO 11507 coating exposed to fluorescent ultraviolet lamp and water; SAE J2020 UV rapid aging test of automotive exterior materials; GB/T 16422.3 Ultraviolet light aging test standard. For more information, please contact our professional team:
Xenon lamp aging test
Xenon lamp aging test is a test that simulates the full sunlight spectrum, and xenon lamp aging test is a test that simulates the reliability of artificial climate at present. It can simulate the artificial climate test which is similar to the nature in a short time. This test can be used for the selection of new materials, the improvement of existing materials or the testing of changes in durability after evaluating the composition of materials. It can provide corresponding simulation test environment and accelerated test for scientific research, product development and quality control. It can better simulate the changes of products exposed to the sun in different environments.
Xenon lamp aging test products are applicable to plastics, food and cosmetics, textiles, auto parts, packaging materials, building materials, rubber, paint, paint, ink, paper, electronic and electrical products, etc.
Xenon lamp aging test standard:
GB/T16422.2-1999 Plastics Test Methods for Exposure to Laboratory Light Sources Part 2: Xenon Arc Lamp
GB/T1865-2009: Paints and Varnishes - Artificial Weathering and Artificial Radiation Exposure - Filtered Xenon Arc Radiation
GJB150.7A-2009 Environmental Test Methods of Junyong Laboratory Part 7: Solar Radiation Test
GB/T5170.9-1996 Verification of Basic Parameters of Environmental Testing Equipment for Electric and Electronic Products Xenon Lamp Aging Test Standard Method for Xenon Lamp Aging Test Chamber Solar Radiation Test Equipment
Ultraviolet aging test
The ultraviolet aging test is mainly applicable to the aging test of non-metallic materials against sunlight and artificial light source. The ultraviolet aging test uses the fluorescent ultraviolet lamp as the light source. Through simulating the ultraviolet radiation and condensation in the natural sunlight, the accelerated weathering test is carried out on the materials to obtain the results of the weathering resistance of the materials. It can simulate such environmental conditions as ultraviolet, rain, high temperature, high humidity, condensation, darkness, etc. in the natural climate, reproduce these conditions, combine them into a cycle, and let it automatically complete the cycle times.
Common test standards for UV aging test:
ASTM G154/G53 Operation of Fluorescent Ultraviolet Lamp Exposure Test for Nonmetallic Materials
ASTM D4329 Fluorescent UV Exposure Test for Plastics
ASTM D4587 Paint Aging Test (UV Aging)
AATCC 186 Weather resistance: UV and humidity exposure;
ISO 4892-3:2006 Exposure of laboratory light sources fluorescent ultraviolet lamp;
ISO 11507 coating exposed to fluorescent ultraviolet lamp and water;
SAE J2020 UV rapid aging test of automotive exterior materials;
GB/T 16422.3 Ultraviolet light aging test standard.
For more information, please contact our professional team:
Advisory
Message
17707690619
